December 05, 2025 4:41 pm

Author Topic: St Cloud to Fargo Relay Needed!!!  (Read 4466 times)

0 Members and 1 Guest are viewing this topic.

Offline sixinarow

  • Suedes Member
  • Hot Rodder
  • *
  • Posts: 795
  • Karma: +1/-0
  • Gender: Male
    • View Profile
St Cloud to Fargo Relay Needed!!!
« on: April 03, 2008 3:27 am »
Anyone heading from the st cloud to fargo? Or maybe know someone who is maybe for toppers? I found a clutch and pressure plate I just need to get it from the St Johns-St Joseph area up here.
"If you can't fix it with a hammer, it must be an electrical problem."

"Such a fine line between clever and stupid."

Offline boristheblade

  • Street Rodder
  • *
  • Posts: 112
  • Karma: +0/-0
    • View Profile
RE: St Cloud to Fargo Relay Needed!!!
« Reply #1 on: April 03, 2008 3:30 am »
Yes sir, I'm goin to Rochester this weekend.
Whatchya need?

Offline sixinarow

  • Suedes Member
  • Hot Rodder
  • *
  • Posts: 795
  • Karma: +1/-0
  • Gender: Male
    • View Profile
RE: St Cloud to Fargo Relay Needed!!!
« Reply #2 on: April 03, 2008 3:42 am »
I have a clutch and pressure plate that is getting dropped off at 2.30 on Friday in St Joseph. Any idea when you would be around that area?
"If you can't fix it with a hammer, it must be an electrical problem."

"Such a fine line between clever and stupid."

Offline boristheblade

  • Street Rodder
  • *
  • Posts: 112
  • Karma: +0/-0
    • View Profile
RE: St Cloud to Fargo Relay Needed!!!
« Reply #3 on: April 03, 2008 5:23 am »
I'll be heading down friday after class- thinking post 11.  2.30 would probably work out mint for just meeting someone at the Pilot station on 94.

Offline sixinarow

  • Suedes Member
  • Hot Rodder
  • *
  • Posts: 795
  • Karma: +1/-0
  • Gender: Male
    • View Profile
RE: St Cloud to Fargo Relay Needed!!!
« Reply #4 on: April 03, 2008 5:24 pm »
Thnkas for the offers guys, but I found someone heading this way
"If you can't fix it with a hammer, it must be an electrical problem."

"Such a fine line between clever and stupid."