December 05, 2025 7:56 am
« previous next »
Pages: [1]   Go Down

Author Topic: Hammerform  (Read 6998 times)

0 Members and 1 Guest are viewing this topic.

Offline Tom

  • Traditionalist...or...I post to much.
  • *
  • Posts: 3436
  • Karma: +1/-0
    • View Profile
Hammerform
« on: January 02, 2008 8:32 pm »
Wanted to make a bubble to cover the cowl steering where it exited the mod. Made this hammer form AND the mallet ( out of an old base ball bat). Tried with some aluminum I had and it's not working out. Gona try again after I get some alum that they recommend.
Logged
"A rat rod is a hot rod with poor workmanship". Roger S.

Offline Eyeball

  • Moderator
  • Traditionalist...or...I post to much.
  • *
  • Posts: 6865
  • Karma: +2/-0
  • Gender: Male
    • View Profile
RE: Hammerform
« Reply #1 on: January 02, 2008 8:55 pm »
I will be looking for updates on this....looks great so far.
Logged
soaken wet shoes and winkled fingers...
hours and hours
inch at a time...

henryj1951 HAMB

Offline sko_ford

  • Suedes Member
  • Traditionalist...or...I post to much.
  • *
  • Posts: 2166
  • Karma: +0/-0
  • Gender: Male
    • View Profile
RE: Hammerform
« Reply #2 on: March 25, 2008 1:28 pm »
hey tom theres a thread on hte hamb about this. hows yours coming?
Logged
WANTED: Mel Tillis valve covers

Offline Tom

  • Traditionalist...or...I post to much.
  • *
  • Posts: 3436
  • Karma: +1/-0
    • View Profile
RE: Hammerform
« Reply #3 on: March 25, 2008 2:01 pm »
Thanks Ross I'll have to check it out. Had to set it aside when I started baggin the 4d. Now that I got that done I'll have to get back on it.
Logged
"A rat rod is a hot rod with poor workmanship". Roger S.

Offline Eyeball

  • Moderator
  • Traditionalist...or...I post to much.
  • *
  • Posts: 6865
  • Karma: +2/-0
  • Gender: Male
    • View Profile
RE: Hammerform
« Reply #4 on: March 25, 2008 2:05 pm »
Got it done? Lets see some pics!
Logged
soaken wet shoes and winkled fingers...
hours and hours
inch at a time...

henryj1951 HAMB

Offline Tom

  • Traditionalist...or...I post to much.
  • *
  • Posts: 3436
  • Karma: +1/-0
    • View Profile
RE: Hammerform
« Reply #5 on: March 25, 2008 2:31 pm »
Yeah I did..........but it's wasn't running worth a shit. I had just rebuilt the carb, so it the carb right?? WRONG!! Like Tracy says 90% of his carb problems are ignition.( right Tim??) The springs on the mech advance on the dizzy were shot. Changed out the distributor and it works much better. Of course only took a day and a half to figure that out!! :x
Logged
"A rat rod is a hot rod with poor workmanship". Roger S.

Offline pinstriper40

  • Traditionalist...or...I post to much.
  • *
  • Posts: 1150
  • Karma: +0/-0
    • View Profile
RE: Hammerform
« Reply #6 on: March 26, 2008 4:56 pm »
I want to try this too- I'll let you figure out the hard stuff first though Tom!
Logged
*Street is Neat*
Pages: [1]   Go Up
« previous next »