December 05, 2025 7:53 am
« previous next »
Pages: [1]   Go Down

Author Topic: Did a search, couldn't find info. Model "A" axle w  (Read 5329 times)

0 Members and 1 Guest are viewing this topic.

Ricola

  • Guest
Did a search, couldn't find info. Model "A" axle w
« on: October 28, 2007 4:59 pm »
Anyone have a model "A" rear axle laying around? I'm looking for a width from backing plate to backing plate and bolt face to bolt face.
Logged

Offline racerjohnson

  • Traditionalist...or...I post to much.
  • *
  • Posts: 1379
  • Karma: +0/-1
  • Gender: Male
    • View Profile
RE: Did a search, couldn
« Reply #1 on: October 29, 2007 5:56 am »
I do. I'll measure it if i think of it. If I remember right the wheel mating surface to wheel mating surface is 58" even.
Logged
The problem with having an artistic eye is that you always end up making more work for yourself. -Cleatus on the HAMB

Offline JakesBackyard

  • Hot Rodder
  • *
  • Posts: 752
  • Karma: +0/-0
    • View Profile
Did a search, couldn't find info. Model "A" axle w
« Reply #2 on: October 29, 2007 3:59 pm »
I don't have one to measure, but I'm pretty sure the inside backing plate to backing plate measurement is 50 1/2 inches.  If you're looking for a good axle to fit, check a 74-80 Mustang II (6cyl). The housing measurement from end to end is 52".  I've used them in 2 A's. It is an 8" with the pumkin removed from the front.  Fits in perfect although you have to have the axles drilled for your bolt pattern.
Logged
__________________________________
There is a very fine line between "hobby" and "mental illness."

Ricola

  • Guest
Did a search, couldn't find info. Model "A" axle w
« Reply #3 on: October 29, 2007 4:16 pm »
Cool thanks!
Logged
Pages: [1]   Go Up
« previous next »