December 05, 2025 8:56 pm
« previous next »
Pages: [1]   Go Down

Author Topic: Next stupid Q.  (Read 4240 times)

0 Members and 1 Guest are viewing this topic.

Ricola

  • Guest
Next stupid Q.
« on: August 31, 2007 1:08 am »
I noticed several cars in the project section that have welding under way but the chassis and body are solid rust. Are they being built that way because it's traditional or just not sand blasted yet?

Excuse my ignorance.

I planned on dropping off my new project at the blaster on the way home. Is this wrong?
Logged

Offline Eyeball

  • Moderator
  • Traditionalist...or...I post to much.
  • *
  • Posts: 6865
  • Karma: +2/-0
  • Gender: Male
    • View Profile
RE: Next stupid Q.
« Reply #1 on: August 31, 2007 1:46 am »
not blasted yet. It is alot easier to work with clean metal but like on my frame I chose to just clean up the areas that need to be welded on and then once it was all tacked together I took it in to have it blasted.
Logged
soaken wet shoes and winkled fingers...
hours and hours
inch at a time...

henryj1951 HAMB

Offline 31Rodder

  • Suedes Member
  • Traditionalist...or...I post to much.
  • *
  • Posts: 3273
  • Karma: +2/-0
    • View Profile
    • http://geocities.com/rodder1931
RE: Next stupid Q.
« Reply #2 on: August 31, 2007 2:32 am »
most of my body is too poor to have blasted and I worried about too many holes in it when it returned, so I will be sand blasting at home where needed, wire brushing and using por 15 in spots.
Logged

Ricola

  • Guest
RE: Next stupid Q.
« Reply #3 on: August 31, 2007 2:34 am »
Thanks, That's what I thought but I just wanted to confirm.
Logged

Offline sko_ford

  • Suedes Member
  • Traditionalist...or...I post to much.
  • *
  • Posts: 2166
  • Karma: +0/-0
  • Gender: Male
    • View Profile
RE: Next stupid Q.
« Reply #4 on: August 31, 2007 2:37 am »
on mine i've cleaned up where i welded and like 31 i'm a lil worried about holes so most of my stripping has been done with a wire brush and a 3m rust disk and not a pole
Logged
WANTED: Mel Tillis valve covers

Ricola

  • Guest
RE: Next stupid Q.
« Reply #5 on: August 31, 2007 2:56 am »
I actually like the rust look. Unfortunately in MN it never sleeps.
Logged

Offline racerjohnson

  • Traditionalist...or...I post to much.
  • *
  • Posts: 1379
  • Karma: +0/-1
  • Gender: Male
    • View Profile
RE: Next stupid Q.
« Reply #6 on: August 31, 2007 6:39 am »
I'm just lazy, so i'm leaving it rusty.
Logged
The problem with having an artistic eye is that you always end up making more work for yourself. -Cleatus on the HAMB
Pages: [1]   Go Up
« previous next »