December 05, 2025 6:07 pm

Author Topic: 94 Carb help?????  (Read 4871 times)

0 Members and 1 Guest are viewing this topic.

wlspdshop

  • Guest
94 Carb help?????
« on: December 07, 2006 11:26 pm »
Well its tech month so here we go…..I need some help….I have a pile of  94 carbs and I am trying run six.  My question is are they all the same CFM or is each ID model of 94 different.  I don’t quite have 6 of one model (4 EAB, I have three of 8ba’s and a few mismatchs of others,  but I have to check what they are) I will have to look tonight when I get home from work to see exactly what I all have.

So any suggestions on what 94’s I can run together.  Also is there one ID model that is better then the other.  Thanks for the help guys….

Offline Eyeball

  • Moderator
  • Traditionalist...or...I post to much.
  • *
  • Posts: 6865
  • Karma: +2/-0
  • Gender: Male
    • View Profile
RE: 94 Carb help?????
« Reply #1 on: December 08, 2006 12:10 am »
I have mixed them. I know there are some CFM differences but I think it is mainly on the larger truck carbs. Allot of em have the venturi size cast into the housing. Just jet them the same. I'll see if I can find any other info. I may have some 8ba's that I would trade for some other models too.
soaken wet shoes and winkled fingers...
hours and hours
inch at a time...

henryj1951 HAMB

wlspdshop

  • Guest
RE: 94 Carb help?????
« Reply #2 on: December 08, 2006 3:04 am »
I will dig through my carbs this weekend when it is a little warmer and see what I have.

wlspdshop

  • Guest
RE: 94 Carb help?????
« Reply #3 on: December 12, 2006 2:44 pm »
Well, I will need two more 8ba's and I will be set for this engine.  Eyeball if you have any 8ba's you want to part with let me know. Thanks.

Offline Eyeball

  • Moderator
  • Traditionalist...or...I post to much.
  • *
  • Posts: 6865
  • Karma: +2/-0
  • Gender: Male
    • View Profile
RE: 94 Carb help?????
« Reply #4 on: December 12, 2006 2:59 pm »
I might I'll look tonight. Do you have others to trade?
soaken wet shoes and winkled fingers...
hours and hours
inch at a time...

henryj1951 HAMB

wlspdshop

  • Guest
RE: 94 Carb help?????
« Reply #5 on: December 12, 2006 5:25 pm »
I have a nice EAB with 15/16 on it and another that has 91-99 with 15-16 on it as well.

Offline Eyeball

  • Moderator
  • Traditionalist...or...I post to much.
  • *
  • Posts: 6865
  • Karma: +2/-0
  • Gender: Male
    • View Profile
RE: 94 Carb help?????
« Reply #6 on: December 16, 2006 2:47 am »
I have one 8ba. You will need to change the base as the one that is on it has a modified shaft for multi carb setup.
soaken wet shoes and winkled fingers...
hours and hours
inch at a time...

henryj1951 HAMB

wlspdshop

  • Guest
RE: 94 Carb help?????
« Reply #7 on: December 16, 2006 5:28 am »
PM sent...