Suedes Car Club
Swap Meet => Wanted => Topic started by: Briggs&Stratton on September 08, 2005 5:31 am
-
Howdy
A friend of mine is starting on a 32 chevy pickup hot rod project, and he is at the point where he is needing a chassis before he can go much farther. The 32 chev cab that he has was from a truck, so the frame is a little on the beefy side. He isnt particular what the frame is from, just so it is roughly the same size/shape of a 20s-30s car (say, like a model A). A perfect frame isnt absolutely necessary. A little crooked or rusty is fine, as long as it is savable without a huge amount of effort.
a rolling chassis would probably also be fine, but he is likely going with a suicide front end with ford axle/spindles/brakes etc.
Have anything? Any leads? Give me a holler and i'll relay him the info.
Thanks
Chris
-
Steve Larson (toppers member) at United Electric in Fargo had one that he wanted $100 for.
-
Steve Larson (toppers member) at United Electric in Fargo had one that he wanted $100 for.
Do you remember what it was from?
Think he would mind if I called him at United?
-
The frame is model A and no I'm sure he would not have a problem with you calling. 701-237-0200 or 701-361-8945 cell.