Suedes Car Club
Swap Meet => For Sale => Topic started by: eugenevik on November 03, 2010 3:50 pm
-
got the "K-Bid " aution again listed under "gene vik,mrmuffler" spend like carzy, getting too old to play with this stuff lots of good tools any questions ask or e mail me mrmuffler@loretel.net
thanks guys
-
google K BID use search word muffler the sale is listed integra, gene vik,
got a 440 mopar block
Mopar hypo exhaust
Edelbroke 440 intake
clutch and bellhousing Mopar
model a sedan rear fenders
a few glasspacks in a pallet
signs
carb kits, yes thers a Holley one in there too
tin parts cabinets
bunch o Harley parts too
helmets
glass for 65 chevelle, ford pu backlite
spark plug wires
dist caps
machine tools and parts, lathe mill 10x50
-
some of those muffler pallets are way under priced those are 8 to 10 ft long pallets chock full of everything that i found lying around and i had 5,000 mufflers in stock
there is a bunch of bigger sheet steel mufflers in some of the pallets, tractor ones w aspirators and a lot of the truck mufflers up to 5 in, everything in mufflers that i found in the shop was boxed to sell i am getting too crippled to use this stuff and want to sell it so i have room to store the show cars
THERE IS SOME GOOD STUFF IN THERE
a lot of the steel welded mufflers sold from $60 to $120 and is in some of the palets and they are at a stupid price of $3.00
THERE IS ALSO A PALLET WITH 180 GLASS PAK MUFFLERS THER i had 2 1/2 in for trucks and there is sometimes sets of 5 ea and i built a lot of glass packs so there is a lot of good quality of stuff there
thanks for your time and happy motoring!!!
eugene
-
wow i didn't realize there are 6 pages of listings!!!
-
viewing on friday 10 to 4
if someone wants to look on saturday i can come to town then
the stuff on last page is from mopar dealer but a lot of nice stuff there too
I cant wait to load all this out so I can get back in my shop again theres 14 pallets of mufflers takes up at least 2 plus stalls and some palets weigh over 2,000 pounds i would estimate, they upend my forklift!!
saome of this equipment was bought at high prices when the economy was flying and it not gonna sell anywhere near that, paid $5500 for the lathe and shipped it from Ohio, the one circle shear is new was like3K a lot of uniwue metalworking stuff on this and still got more to sell later
my roadster can go in the showroom when this is over n never had a car in there, bought this building in 1972, kind a museum in some ways
-
the milling machine is only 110$ and the lathe is about $65
tak a look lots of cheep exhaust
some of those pallets of exhaust have some very expensive mucclers and the pallet is only $5 the pallets are mostly about 8 foot long some a little shorterTONS OF GLASSPACKS FOR HOT RODDERS!!!!
LINK for the lazies have a good day
http://www.k-bid.com/cgi-bin/mndetails.cgi?klosteria124