Suedes Car Club
General => Project Reports => Topic started by: ColeMonkey on August 05, 2008 9:55 pm
-
haven't posted anything on my car yet so I thought now was a good time too! This is my first build so if you have and good advice or suggestions, that would be awesome!
When I got my frame the horns were chopped off...
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2002.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2003.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2004.jpg)
Then I purchased new ones...
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2005.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2006.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2007.jpg)
Cross member added...
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2011.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2012.jpg)
Started putting the suspension together...
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2016.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2017.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2018.jpg)
Attempted to open the drivers side doors... The back one opens but the front one the hinges are pretty rusted together.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2009.jpg)
Time for a lift kit for the Jeep... She don't like that trailer holding her down.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/frame2013.jpg)
Tell me what ya think.
-
Are you planning to spit the wishbone?
What are you running for a rear suspension?
Looks good so far!
-
Yup we will be splitting them!
For the rear we just got the 4-link... We are gonna put coil-overs in the rear.
-
Look like you are starting to make some progress
Nice set of rims.
-
nice frame repair! I hope you're keeping the body a 4 door? That'd be cool. I'm not familiar with the plans overall. Whats next?
I think your 4 link/coilover rear is a good idea.
-
The frame work and suspension looks good, but I sure don't envy the work ahead on the body. :)
What kind of drive train are you planning?
-
The frame work and suspension looks good, but I sure don't envy the work ahead on the body. :)
Ditto. Don't worry about it though- just work on the bodywork until you're almost burned out on it, then stop for a while- looks like you'll have some work ahead of you! Nice job on the frame so far- split bones will be cool!
-
I am keeping it a full 4-door!!!
I'm gonna be putting the 305 V8 I got from my uncle in it for now.
And ya, the body needs a lot of work... But I'm up for the challenge.
-
need a 3 speed manual? 10 bolt chevy?
-
Nah, I got a tranny for now. Its a 4L60E... or something like that.
-
i think ya need the 3spd
-
No no, electronic overdrive trans is waaay better than a 3spd manual in an old street rod. :)
-
Just use what ya got and get it on the road
-
Just use what ya got and get it on the road
Exactly!
-
my issue it with the 'puter on that tranz
-
Just use what ya got and get it on the road
With where my car is right now, its hard to argue with that.
-
We started choppin the top the other day. We aren't finished yet but here is a couple quick pics!
(http://i75.photobucket.com/albums/i302/IllicitKougar666/more022.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/more023.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/more024.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/more025.jpg)
-
For some reason it tells me i have an error when I post, so thats why I accidentally double posted.
-
Looks good.
I fixed your double post but now I get an error when posting......have to call in the tech guy. :)
-
O yeah, choppity chop chop chop.
-
Its actually going together better then I thought it would.
-
Is that Todd's ( 31 Rodder ) old 4 door??
-
looking good. i sould swing by and take a look
-
Yup its Todd's!
-
Here's a little update. This weekend going to attempt to Z the frame.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Chickenparmnight005.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Chickenparmnight007.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Chickenparmnight008.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Chickenparmnight009.jpg)
And this is my donor. 84 Suburban. 350ci w/ 700R4 tran. engine needs rebuild, has 220k.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Chickenparmnight011.jpg)
-
Looks like the build is coming along nicely, you are giving the car a soul. "The Colemonkey Sedan" tm
-
lookin good so far man... despite what everyone says about 4 doors... you can definitely fit a lot more chicks in one! hell ya i give you thumbs up for rockin out a 4 door, thats how ya gotta do it!
-
I love 4 doors man! I dont care what people say. Its mine and thats what matters!
I just wish I could make the rear doors functional... :(
-
why are they not functional?
-
why are they not functional?
Yeah............what he said.
-
Because the rear wheels are gonna over hang over the doors once we get it to where we want it.
-
could they be modified to be hinged at the front and clear the tires?-just a thought
-
hopefully you can do something to make those doors work, or else you might as well weld em up! then you have no more 4 door!
-
zee
-
Looks like it's coming along quite nicely!!! I like the look of a chopped 4 door...and it's chopped just right! Keep up the good work!
-
Here's some more pics. Finished my frame!
Before & after
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS001.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS003.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS004.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS006.jpg)
I forgot to snap a pic of it before it went under the body so I snapped one quick before it became invisible.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS007.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS008.jpg)
Now if I was going with air bags, this sure would look sweet!
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS012.jpg)
Here is some before & after body work I did. My first time doing this so its not perfect but I think it turned out alright!
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS017.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS018.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS021.jpg)
-
Holy shit that is a big z in the front.
-
looks like you have been busy.
-
Lol ya it should be pretty low... I hope!
I has been busy! :D
-
how much is that in the front?
-
8in
-
wow, is that because yyou dont have a dropped axle?
-
Ya
-
do ya have a picture from the front 3/4 with the body on?
-
No I'll try get one this weekend.
-
thats alotta Zee! hope you got it sittin where you want it!
-
Here is that 3/4 pic for you Ross.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/INPROGRESS036.jpg)
-
Before & after shots of the engine being cleaned.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore003.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore004.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore005.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore006.jpg)
Tranny before & after.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore007.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore008.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore009.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore001.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/Somemore002.jpg)
-
It looks like the engine and tranny cleaned up nice are you going to paint them?
-
I don't think I'm gonna paint them. If I do it will just be black probably.
-
(http://i75.photobucket.com/albums/i302/IllicitKougar666/trhbgv.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/nybtrvc.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/rgtrg.jpg)
Thumper CompCam
(http://i75.photobucket.com/albums/i302/IllicitKougar666/fvfvvf.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/fvfvvv.jpg)
Cloyes double roller timing chain, Comp Pro Magnum Anti-Pump Hyd. Lifters, Cleaned rods & valves.
-
And Todd, I decided that im gonna paint it a low gloss black and paint the valve covers green.
-
Before paint.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/aa.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/aaa.jpg)
After...
(http://i75.photobucket.com/albums/i302/IllicitKougar666/aaaa.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/aaaaaa.jpg)
Valve cover arent done yet. They will be green.
-
that turned out nice, what did you use to degrease the engine it looks so clean.
-
We picked up some Super Clean from O'reillys. That and a wire brush and pressure washer. LOTS of scrubbing haha. I'm glad thats over.
-
Castrol Sup[er Clean is the best degreaser i have ever used that can be bought in a aparts store.
-
Castrol Sup[er Clean is the best degreaser i have ever used that can be bought in a aparts store.
I agree with that. The best I have found for cleaning engines is oven cleaner.
-
Ya it worked fantabulous for us!
-
Engine and tranny sitting inside.
(http://i75.photobucket.com/albums/i302/IllicitKougar666/bbb001.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/bbb002.jpg)
-
Lookin good ColeMonkey. Keep a rollin'
-
(http://i75.photobucket.com/albums/i302/IllicitKougar666/dd007.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/dd006.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/dd005.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/dd004.jpg)
(http://i75.photobucket.com/albums/i302/IllicitKougar666/dd001.jpg)
-
I hope this video works. Cross your fingers!
Hope you enjoy.
-
You could have it ready for 50s by next weekend. Then I don't have to get my car done.
-
Haha. Ya I just need a loan!
-
Excellent!
-
Wow, you are moving right along......good job.
-
Ya we are really trying to bust ass on this thing! BUT... I found out today that I wont have a job in 3 weeks. So I dont know what im going to do for money.
-
just focus thats what i'm doing family house car
-
Sko- Whats a family house car? Like a motorhome?
-
that could be or i could use comas
-
3 weeks? How is it you're getting an extra week of work? By my count it'll be less than two weeks now.
And you didn't answer your phone so I didn't order you that steel today when we ordered.
-
Well I was told that we are gonna be employed till the 26th... And dammit I was sleeping!
-
remember you can sleep in your hot rod but you cant drive your apt ;)
-
(http://i75.photobucket.com/albums/i302/IllicitKougar666/0731091645.jpg)
-
alright, tell us more! looks like you have been bustin ass
-
great job
-
Oh, Cool! Glad to see it rollin'. How's it been going with the build?
-
Its goin very good! We just got a new edelbrock intake and carb setup to replace that crappy quadra jet, if anyone wants it make an offer! Its very very close to done, a little bodywork left, and paint basically. If the weather turns out nice we might bring her to St. Cloud car show tomorrow.