Suedes Car Club

General => Newbie Intros => Topic started by: brian on October 19, 2007 1:16 am

Title: new guy
Post by: brian on October 19, 2007 1:16 am

:lol: hi from bismarck new to suedes site forklift mech. for living got 27 t touring in the works t bucket style frame 4 inch kick in front frame and 18 kick in rear 35 ford wheels wide white byas tires i will put in pictures in soon also 67 mustang drag car also a coupe saved for future  just moved this summer to new house want to get t going this by spring  BRIAN CHASKA

Title: RE: new guy
Post by: Eyeball on October 19, 2007 1:25 am

Welcome aboard. What is the plans for motivation of the tub?

Title: T PLANS
Post by: brian on October 19, 2007 1:31 am

SMALL BLOCK FORD STRAIGHT AX FRONT A FORD REAR SPRING LOW TO THE GROUND AS I CAN AND HOPEFULLY NO PAINT IF I CAN FIND A REAR TO THE BODY I HAVE IT WAS CUT OFF RIGHT AT THE REAR DOORS I HAVE DOORS JUST NEED REAR BODY PANEL

Title: RE: T PLANS
Post by: pinstriper40 on October 19, 2007 5:09 am

I think your caps lock is on.  WELCOME ABOARD!

Title: RE: T PLANS
Post by: CJHacker on October 19, 2007 6:07 am

Welcome to the board!  I'm glad to hear that it's not a coupe.  ;-)

Title: RE: T PLANS
Post by: pinstriper40 on October 21, 2007 9:44 pm

Ouch.  any pics yet?  sounds cool!

Title: T pics
Post by: brian on November 04, 2007 2:12 am

here is some pictures of the t any help to get the rear of the body would be great :lol:

Title: RE: T pics
Post by: sko_ford on November 04, 2007 7:48 pm

just my opinion but the way you have it set up now i ditch the rear doors and go rpu.  it looks like the back seat would be full of frame.

Title: T pics
Post by: brian on November 04, 2007 10:30 pm

thanks i am holding out to see if i could get the rear of the body or a good box the reason for the touring was to hide the gas tank battery and the frame then put a cover that snaps on . i still have to move the body forward on the frame and channel the body over the frame does anyone know of a rad that fits in an a shell well. still looking for any leads on the rear body section  any help would be great .if  anyone else has any ideas i could use them thanks

Title: RE: T pics
Post by: pinstriper40 on November 05, 2007 11:29 pm

I'd agree with sko on that one- rpu is a good idea.  you can still put that stuf inthe bed and have a cover over it.  looks like you're off to a good start though!

Title: new guy
Post by: JakesBackyard on November 06, 2007 3:52 am

Check with Dave Boardman at Hot Rods and Trim. 701-274-8975. He has built two T's out of the front half of tourings.  He may have a rear panel laying around.

Title: t parts
Post by: brian on November 07, 2007 10:12 pm

thanks for the lead i called and he needs one too so the hunt is still on