Swap Meet => For Sale => Topic started by: JakesBackyard on December 06, 2006 11:14 pm
Title: Model A Xmember and Frame Horns
Post by: JakesBackyard on December 06, 2006 11:14 pm
So since I made the body cart from an A frame, I have L&R 40" horns and a nice (no cracks) rear Xmember. The left rail had been bent at one time and is a little twisted, but the horn is nice. The right one is good. Best offer or trade for something interesting.
Title: RE: Model A Xmember and Frame Horns
Post by: Eyeball on December 06, 2006 11:40 pm
I would like the rear crossmember if someone else wants the rails. Ryan may be interested in them. I have nothing interesting as far as I know so PM me a price tag. I'll buy it all if you don't want to split it up.
Title: Model A Xmember and Frame Horns
Post by: JakesBackyard on December 07, 2006 12:17 am
I have no idea what the pcs. are worth, but come on now....I've been in your garage....you must have some interesting conversation piece I can hang on a wall or some such trinket....I'm looking more to have some fun with this verses cash.....
Title: Model A Xmember and Frame Horns
Post by: Eyeball on December 07, 2006 12:23 am
Hey what the hell have you been doing in my garage.....:) What are you looking for? Need anything for your sport coupe? Lower door patch panel? Chrome SBC starter? Used flathead water pumps? a nice qjet carb, pitted 51 merc taillight bezels, an assortment of different plug wires ALL used... and my best trading stock USED COILS
Title: Model A Xmember and Frame Horns
Post by: Ryan on December 07, 2006 1:30 am
I would be interested in the frame horns. PM me a price if you please. Sorry I don't have anything worth trading right now, unless you need a '61 Fairlane :roll: :roll: .
Title: Model A Xmember and Frame Horns
Post by: JakesBackyard on December 07, 2006 4:29 am
This could really get fun. I'm really trying to turn a paper clip into a house! (I'm sure you heard that story a while back.) Put that creativity to work here. I have one and a half new painted bare walls in my garage just yearning for new conversation pieces. And I'll split up the pcs. And I won't take any PPG posters...I have all 10. Also no risque posters...my wife says they're not good for the grand kids to see. And I'm not sure what a SBC is.....there might be one in a car in my garage, but it isn't mine....
HEY - I just thought of something I need....10"X5"Xany depth gas tank off of like a snowblower or old Briggs engine...NOT the kind that bolts to the carb....need the one with a cap on top and outlet on the bottom...usually has some sort of bracket off the top or side to bolt to engine...mount not really important...has nothing to do with a car....I'm remodeling an old Arctic Cat for ice fishing.....
Someone must have one laying behind the garage...
:D
Title: Model A Xmember and Frame Horns
Post by: Eyeball on December 07, 2006 4:42 am
I'll try to snap some pics of some of the "items" for your consideration tomorrow.
Title: Model A Xmember and Frame Horns
Post by: AntiBling on December 07, 2006 4:59 am
Quote from: "JakesBackyard"
HEY - I just thought of something I need....10"X5"Xany depth gas tank off of like a snowblower or old Briggs engine...NOT the kind that bolts to the carb....need the one with a cap on top and outlet on the bottom...usually has some sort of bracket off the top or side to bolt to engine...mount not really important...has nothing to do with a car....I'm remodeling an old Arctic Cat for ice fishing.....
Someone must have one laying behind the garage...
:D
I'll let someone try and trade you for what they need if they got one, but if not I've got quite a few sitting around the farm in the old buildings.
Title: Model A Xmember and Frame Horns
Post by: racerjohnson on December 07, 2006 5:56 am
damn, and the only bent frame rail I have is the left one!!!!!! I think.
I do need a rear crossmember (mine is cracked in half) and I'll challenge Eyeball to a thumb war for it. I'll even give him an ignition coil.
For trading, I have a cool chrome goose or some sort of bird hood ornament thats kinda cool, and I have a smokey yunick piston blank.
Title: Model A Xmember and Frame Horns
Post by: JakesBackyard on December 07, 2006 2:54 pm
Maybe we could get that thumb wrestle on video, post it here and the winner takes all! That right there would be a great trade.
Antibling...when are you going to get close to Fargo? You could drop off one of those tanks. You never know....you could then be selling A frame parts. Or I'd just pay for the tank.
:D
Title: Model A Xmember and Frame Horns
Post by: Eyeball on December 07, 2006 3:38 pm
I will have to forfeit the match do to a disability. :) :D
It is amazing what you can find on the net.
Seriously if Mr. Johnson (Pete) is in need of it I will step aside and let him trade for it.
Title: Model A Xmember and Frame Horns
Post by: JakesBackyard on December 07, 2006 5:13 pm
:lol:
Old age is creeping up, huh?
:lol:
Title: Model A Xmember and Frame Horns
Post by: JakesBackyard on December 07, 2006 7:55 pm
It looks like Mr. Johnson has come up with a deal on a gas tank for the A frame parts.(sorry Ryan, you'll have to deal with him on the horns.)
This has been fun, thanks everyone. I may have to dig up some more stuff to trade off on here.
:)
Title: Model A Xmember and Frame Horns
Post by: racerjohnson on December 08, 2006 4:16 pm
um. . . ok. i better find a tank really fast.
Title: Model A Xmember and Frame Horns
Post by: sko_ford on December 08, 2006 10:38 pm