March 28, 2024 10:03 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tracywiedrich

Pages: [1] 2 3 ... 31
1
General Discussion / Tower City Wheel Bearing Repairs
« on: May 22, 2016 3:42 AM »
I just had to mention that about 2 weeks ago my son and i headed to Fargo to pick up a very large load of liner panel for a shop addition, and lo and behold by the Tower City rest area we noticed a very hot trailer bearing. To make a long story short we got very lucky and were able to get the wheel and bearings off. We unhooked the trailer and headed 17 miles west to Valley City and aquired all the needed parts and a hour later were back on the road. For those that dont remember this is the exact same rest area Tom and i smoked the wheel bearing on my 56 on the way to the Hunnert Car Pileup...i cant seem to get by that rest area without spare bearings...

2
Wanted / Re: Camaro / Firebird / Nova / 55-57 Rearend
« on: May 09, 2016 5:23 PM »
Got a tri-five one, spins, dang Stephen I was just in Fargo last Wednesday with a trailer too...Might be coming for the swap. lemme know if u still need one....Weed... actually text me @701-880-8857

3
General Discussion / Re: Early Fifties 29 Roadster
« on: March 15, 2016 7:58 PM »
I assume that is the frame I dropped off in fargo last summer...?Who dija get that from Stephen? I know I shud remember but seem to have spaced the details out....

4
Wanted / Re: Wanted 32 Frame
« on: March 10, 2016 3:32 PM »
Yea a lot of work but I think I can handle it...just after the 56 though...If I can contain myself

5
Wanted / Wanted 32 Frame
« on: March 10, 2016 1:38 PM »
Anybody got a deuce frame they don't need? Also need decklid, passenger door garnish molding for five window coupe, and a windshield frame... Call Weed..880-8857 thanks

6
Sounds good to me, I'm headin your direction Saturday but I'm taking the wifes CRV, otherwise I cud bring the sub down ...you coming this way anytime soon?

7
Pretty much...its been like two years and its still here...

8
trade ya fer a 77 Nova front sub, you pick up...haha

9
For Sale / Re: Inventory reduction Sale
« on: October 03, 2014 5:39 PM »
I'll let the youngans know...

10
For Sale / Re: Inventory reduction Sale
« on: October 03, 2014 3:37 AM »
Ya, I know, I'm not looking fer anything anyway, but my son and his buddy are always on the lookout fer motorcicle parts and they're is usually some pretty good stuff there. And if anyone is interested in some of my smaller items I could drop em on the way...

11
For Sale / Re: Inventory reduction Sale
« on: October 02, 2014 4:42 PM »
You mean me , Ryan? I'm prolly not gonna make it, but I am going to the Minnesota one the next weekend though...

12
For Sale / Re: Inventory reduction Sale
« on: October 01, 2014 4:02 AM »
Oh sorry, howd i forget that? Its for a flathead ford Todd. I think the early one (59ab)

13
For Sale / Inventory reduction Sale
« on: September 30, 2014 9:17 PM »
Just in case we sell our place I have decided to try to further reduce my stash. All prices are negotiable, If your interested call. 701-748-5781 or text or call 880-8857, thanks Weed
1955 Chevy 150 tudor sedan roller, body only. windows are out but there, New windshield weatherstrip, extra uncut hood. comes with vintage cragars and bias plys, 50's on the back. rear wheelwells are cut. Needs front quarter patches and some floor work..$4000.00
1929 model A roadster. was a hotrod from the fifties, was channeled 11 inches, needs subframe work. has original frame and suspension. Comes with 35 ford wires, 32? trans. 29 sheel and radiator. Model A headlites and nice replacement gas tank. Comes with aftermarket quarter panels. Model a sedan buckets. $3500.00           
SOLD  1952 Chevy bel-air convertible. rough but restorable roller. Have new top, new boot and fender skirts. also have leaded seam hood to go with. Purchase includes a 51 hartop for parts. All four original rims and hubcaps. needs floor and quarter work. $2500.00
1957 Olds four door sedan, complete car, 371, auto. engine is stuck. rolls. Nice front clip, has weak rockers. $800.00..have title
1984? S-10 extended cab, short box, roller , frame donor. have tile. No engine or trans..$300.00
Motors. two 8ba flattys, both stuck but been inside...price?
55 265 two barrel engine, was loose last time I checked. $300.00
56 265 power pak, complete from carb to manifolds. was overhauled in the early eighties, ran great, been sitting for years though. $700.00
79 camaro 305, complete, two barrel, ran good, been sitting. $200.00
3 duece manifold for 371 Olds, incorrect carbs. $300.00
2 pot Edmunds custom intake from the fifties. $300.00
4- stromberg 97 carbs...$100.00 each or deal on the lot.....STROMBERGS ARE SOLD
1 LZ lincoln Zephyr V-12 carb, 94 style.. $100.00
47 Ford banjo rear, just removed from running car within 2 years, nice $200.00
2 Flathead truck bell adapters,  $50.00 each
smallblock to early ford trans adapter. $100.00
4 14" www bias plys, good tread. $400.00
35 ford radius rods, nice shape $200.00
1 set round back ford spindles, nice clean $100.00
Dodge double dip axle with brakes, $100.00
V-8 60 hp front tube axle, needs work on one boss. $500.00
9 55-57 chevy three speed trannys $50.00 each
57 ford nine inch rear, gears unknown, no brakes or hubs. $200.00
16 gallon keg for gas tank?Smaller pony keg from the 60's-offer
single axle trailer with new paint and tires. would work good for light rods. Needs a deck of your choice. $800.00
All prices are negotiable, there might be more as I go through this. if you need picts, call. can send cell phone picts sooner though. thanks boys...Weed

14
For Sale / Re: 1984 El Camino Rear Differential
« on: September 29, 2014 8:01 PM »
Okey doke, thats the same clip I used on my 53. The s-10 drop spindles bolt right on, but I'm sure you knew that...

15
For Sale / Re: 1984 El Camino Rear Differential
« on: September 29, 2014 5:39 PM »
You have anything of the elk body or interior left?

Pages: [1] 2 3 ... 31