1
April 29, 2024 10:00 PM
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
4
Wanted / 50-60s camper
« on: January 27, 2012 3:34 AM »
Looking for a small 50s or 60s camper. Nothing fancy under a grand would prefer no leaks and good windows. Interior trashed I can deal with because I'd like to gut it and build it to my needs.
5
General Discussion / Vintage Photo
« on: December 28, 2011 5:49 PM »
Saw this on the HAMB today and saw it was labeled Nash dealer grand forks nd.
6
General Discussion / Looking for cars for pin-up calendar
« on: November 04, 2011 8:00 PM »
Stefan and I are working with the gals at Bad Weather Burlesque to do a vintage pin up calendar, and looking for cars to use for the shoots. It's supposed to be half way decent tomorrow so if you haven't put your car away for winter and willing to bring it out in the F-M area let me know.
I'm going to be trying to shoot weekends before the snow flies, then finish up shooting this spring.
I'm going to be trying to shoot weekends before the snow flies, then finish up shooting this spring.
7
General Discussion / Attn: Mr. Vik
« on: August 12, 2011 3:52 PM »
Someone is looking for some info on your wagon.
http://www.facebook.com/photo.php?fbid=10150258105906850&set=a.10150243085406850.326066.110301641849&type=1
http://www.facebook.com/photo.php?fbid=10150258105906850&set=a.10150243085406850.326066.110301641849&type=1
8
Event Announcements / Teamsters Cruise Night
« on: July 06, 2011 12:55 AM »
July 18th, starting around 5:30 but said just a laid back deal, show up whenever, leave whenever.
9
Wanted / 53/54 Chevy powerglide kickdown rod
« on: June 13, 2011 1:19 AM »
Just like it says, I need the kickdown rod.
10
Wanted / 36 (or other wide five hubs/drum)
« on: May 19, 2011 9:34 PM »
Figured I'd ask for the 36's since they aren't the ones you want to use for hydraulic brakes, I basically want to use the outers to cover up a wheel adapter since I don't want to run hubcaps.
If you got 37-39 hubs/drums I would consider them and consider using my buick drums on something else.
If you got 37-39 hubs/drums I would consider them and consider using my buick drums on something else.
11
Wanted / 53/54 Chevy stuff
« on: February 03, 2011 7:22 PM »
Looking for another set of grill teeth, may settle for another center tooth if you got it. Upper grill bar if you got one a straight one with decent driver quality chrome. Front bumper with decent chrome, mainly just need the passenger side section. Taillights, all red with no reverse lights. If someone has some decent park light lenses I would take them too.
I'm going to try to find a picture but I saw this on the HAMB and want to find one now, I would like a clock delete plate for a 53/54.
235 stuff, I'd like to find a pair of the cork(?) carb plates. I'd also like to find a rochester carb from a 54 with a powerglide.
And if anyone has a 54+ 261, would be in the heavy trucks, if it's not locked up i'd be interested.
I'm going to try to find a picture but I saw this on the HAMB and want to find one now, I would like a clock delete plate for a 53/54.
235 stuff, I'd like to find a pair of the cork(?) carb plates. I'd also like to find a rochester carb from a 54 with a powerglide.
And if anyone has a 54+ 261, would be in the heavy trucks, if it's not locked up i'd be interested.
12
Wanted / Model A crossmembers to borrow or buy
« on: November 22, 2010 4:45 PM »
If anyone's got some loose A spring crossmembers front and rear that I could borrow or buy if you're looking to sell, want to see how they work with some frame rails I got.
13
General Discussion / 61 For 61 Car Show
« on: September 25, 2010 10:53 AM »
Was a good time, just snapped a few photos.
http://www.facebook.com/antiblingphotography#!/album.php?aid=42683&id=117247714957686&ref=mf
If that link doesn't work just go to:
http://www.facebook.com/AntiBlingPhotography
And it should be on top of the page.
http://www.facebook.com/antiblingphotography#!/album.php?aid=42683&id=117247714957686&ref=mf
If that link doesn't work just go to:
http://www.facebook.com/AntiBlingPhotography
And it should be on top of the page.
14
For Sale / Hot Rod Drags Posters
« on: August 09, 2010 6:02 PM »
I had a bunch of these printed up, 11x17 Posters, they are printed on thick paper, not your typical poster paper. 2 (1 of each) for $6.
15
Wanted / Few things for my hot rod project.
« on: August 06, 2010 6:43 PM »
401/425 Nailhead parts, mainly looking for a 3x2 intake or 2x4. Will consider buying other parts as well such has headers or dress up stuff, but mainly what i want for now is an intake.
Model A Springs front and rear.
Headlight mounts
26/27 T Roadster/Touring Windshield stanchions
26/27 T Roadster/Touring Windshield frame, mainly just need the lower one.
Headlight mounts
26/27 Turtle Deck w/decklid. I'm not sure what route I'm going yet but wouldn't mind seeing what I have for options.
I'll probably think of more. I won't have cash for everything right now but within a few months so if you got stuff you've been holding on to that you're willing to part with, let me know.
Model A Springs front and rear.
Headlight mounts
26/27 T Roadster/Touring Windshield stanchions
26/27 T Roadster/Touring Windshield frame, mainly just need the lower one.
Headlight mounts
26/27 Turtle Deck w/decklid. I'm not sure what route I'm going yet but wouldn't mind seeing what I have for options.
I'll probably think of more. I won't have cash for everything right now but within a few months so if you got stuff you've been holding on to that you're willing to part with, let me know.